Gate Valve Bypass and Pressure Equalization: RFQ Checklist
Define a gate valve bypass package with opening differential pressure, equalization purpose, piping scope, isolation requirements and inspection records.
WENZHOU ZHONGYUE VALVE TECHNOLOGY CO., LTD.
11/18/20263 min read


“Gate valve with bypass” is an incomplete purchasing description. It does not identify why the bypass is required, what it connects, who supplies the piping, or how the arrangement affects isolation. Those omissions can leave two quotations technically incomparable.
Before requesting a price, define the purpose of the bypass and the operating cases for the main valve. Then review the complete package with the valve supplier and the project piping engineer.
Start with the purpose of the connection
Distinguish three requirements in the enquiry:
A connection intended to equalize pressure across the main valve before opening.
A plant bypass intended to maintain an agreed process flow while equipment is unavailable.
A separately engineered provision addressing pressure within a valve cavity.
These functions should not be treated as interchangeable. In particular, an external upstream-to-downstream connection is not proof that a trapped body cavity has an adequate relief path.
Some gate valve designs use bypass arrangements to reduce differential pressure before opening. Velan describes this function for one of its parallel-slide gate valve ranges. That is useful engineering context, not evidence that every gate valve requires a bypass or that the same arrangement suits another manufacturer's design.
Define the main valve's opening case
A valve's nominal size and pressure class do not provide all the information needed to review opening loads. Give the supplier the pressures on both sides when opening is required, including abnormal operating cases specified by the project.
The case table should identify:
Fluid and relevant phase or solids information.
Normal, maximum and minimum service temperatures.
Upstream and downstream pressures before opening.
The differential pressure at which opening is required.
Whether reverse-pressure operation is required.
Operating frequency and operator type.
Any required opening sequence or permitted waiting time.
Do not prescribe a bypass diameter from pipe size alone. Ask the responsible designer to establish its required capacity and the applicable operating constraints.
For the base valve specification, use the large-diameter gate valve RFQ guide. This article addresses the additional bypass package scope rather than repeating that general selection checklist.
Put the supply boundary on a drawing
A quotation should identify whether the bypass is factory assembled, supplied loose, or provided by the project piping contractor. Request a marked drawing showing the connection locations, valves, fittings, supports and instrument interfaces included in the offer.
Clarify whether the quoted scope includes connection machining, welding, heat treatment where applicable, inspection, coating and assembly testing. Ask the supplier to list exclusions. A photograph of a small valve next to the main valve does not define those boundaries.
If the arrangement changes the main valve's pressure boundary, require the supplier's engineering acceptance and the relevant approved manufacturing documents. Do not add field connections based on a marketing illustration.
Review isolation and operating access
A bypass can create another flow path around a closed main valve. The project review therefore needs to address the complete isolation arrangement, not just the main valve position.
Ask the project team to define normal bypass positions, identification, any locking requirements, access and the operating sequence. Where the project requires instruments to confirm equalization, identify their locations and supply responsibility.
These decisions belong in the approved piping and operating documentation. A procurement checklist should not become an improvised start-up or maintenance instruction.
Specify inspection and document deliverables
Request an inspection schedule for both the main valve and the bypass scope. Identify the applicable acceptance criteria for each component and for the assembled package where an assembly test is required.
The handover list can include:
Approved arrangement and connection drawings.
A component list with material and pressure-rating information.
Material inspection documents required by the purchase order.
Welding and examination records where applicable.
Pressure and seat-test records for the agreed scope.
Coating or preservation records when specified.
Installation and operating instructions covering the supplied arrangement.
Use the inspection and test plan guide to assign review, witness and hold points before manufacturing. Do not assume a test record for the main valve automatically covers all bypass components.
RFQ wording that exposes differences between offers
Attach a piping sketch and ask:
“Review the stated opening differential-pressure cases. Confirm whether an equalizing bypass is required for the offered design. Where proposed, identify its engineering basis, connection route, component ratings, supply boundary, inspection scope and operating-document requirements. List deviations and exclusions separately.”
Compare responses against that same attachment. A lower price may reflect omitted piping or records rather than a more economical equivalent package.
Request a defined gate valve package
View the Zhongyue gate valve product page and send the valve list, pressure cases and bypass sketch through the contact page or sales@hizhongyue.com.
WENZHOU ZHONGYUE VALVE TECHNOLOGY CO., LTD. can review the enquiry against the offered supply scope. Required configuration, inspection documents and any special connection arrangement must be agreed in the project-specific technical offer.
Zhongyue High Quality Valve Manufacturer
The products are exported to the United States, Europe, the Middle East, Southeast Asia, Russia and other countries and regions, reliable quality and reasonable price. Reliable quality and reasonable price are the basis of our continuous development.
Contact
Get in touch Please leave the questions you need to consult, later we will have a professional technical team to contact you.
Email: sales@hizhongyue.com
Tel: +86 0577-28828932
WhatsApp/WeChat: +86 15658617888
© 2026 ZHONGYUE VALVE. All rights reserved.



